Terraza FWD V6-3.5L VIN 8 (2005)
18. Disconnect the wiring harness connectors (1) from the actuator control module (3).
19. Remove the motor clutch assembly nuts (9).
20. Remove the motor clutch assembly bolts (10).
21. Carefully remove the motor clutch assembly from the vehicle.
INSTALLATION PROCEDURE
1. Ensure the J-clips (3) are secured to the inner body panel prior to installing the motor clutch assembly.
2. Position the motor clutch assembly to the vehicle.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the motor clutch assembly bolts (10).
Tighten the bolts to 10 N.m (89 lb in).
4. Install the motor clutch assembly nuts (9).
