buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Computers - Radio Fuse Removal Prior to Programming|Page 976 > < Computers - Radio Fuse Removal Prior to Programming|Page 970
Page 1
background image

Relays and Modules - Steering: Technical Service Bulletins
Computers - Radio Fuse Removal Prior to Programming

Bulletin No.: 04-08-44-024A

Date: February 01, 2007

INFORMATION

Subject:
Removal of Radio Fuse Before Attempting to Program/Reprogram Modules Using Service Program System (SPS)

Models:
2005-2007 Buick Terraza
2005-2007 Chevrolet Corvette, Uplander
2005-2007 Pontiac Montana SV6
2005-2007 Saturn Relay

with CD Player or Changer AM/FM with MP3 Player (RPO US8 or US9)

Supercede:

This bulletin is being revised to add the 2006 and 2007 models years. Please discard Corporate Bulletin Number 04-08-44-024 (Section 08 - Body and
Accessories).

Failure to remove the radio fuse prior to programming/reprogramming any module using the SPS service procedure may result in an inoperative radio.

DO NOT remove the radio fuse when programming/reprogramming the radio.

The radio may interrupt Class-2 programming and/or reprogramming of other modules on the buss.

Prior to programming/reprogramming any module using the SPS service procedure, the technician is required to remove the radio fuse.

2005-2007 Corvette

Remove the Radio/S-Band/VICS 15-amp fuse from the I/P electrical center (passenger side) prior to SPS reprogramming.

Program/Reprogram the appropriate module that requires service.

Reinstall the radio fuse.

Computers - Radio Fuse Removal Prior to Programming|Page 976 > < Computers - Radio Fuse Removal Prior to Programming|Page 970