Terraza FWD V6-3.5L VIN 8 (2005)
Air Bag(s) Arming and Disarming: Service and Repair
Enabling
Enabling Procedures - Air Bag Fuse
Enabling Procedure - Air Bag fuse
1. Place the ignition in the OFF position.
2. Install the fuse(s) supplying the power to the SDM.
3. Turn the ignition switch to the ON position. The AIR BAG indicator will flash then turn off.
4. Perform the Diagnotstic System Check - Vehicle if the AIR BAG warning indicator does not operate as described.
Enabling Procedures - Negative Battery Cable
Enabling Procedure - Negative Battery Cable
1. Place the ignition in the OFF position.
2. Connect the negative battery cable to the battery.
3. Turn the ignition switch to the ON position. The AIR BAG indicator will flash then turn OFF.
4. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described.