buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

SIR Disabling and Enabling Zones|Page 12666 > < SIR Disabling and Enabling Zones|Page 12664
Page 2
background image

3. Install the CPAs to the left and right front end sensor connector. 
4. Install the Air Bag Fuse.
5. Install the cover for the underhood fuse center.
6. Use caution while reaching in and turn the ignition switch to the ON position.The AIR BAG indicator will flash then turn OFF.
7. Perform the Diagnostic System Check - Vehicle if the AIR BAG warning indicator does not operate as described. Refer to Diagnostic System

Check - Vehicle.

SIR Disabling and Enabling Zones|Page 12666 > < SIR Disabling and Enabling Zones|Page 12664