Terraza FWD V6-3.5L VIN 8 (2005)
Air Flow Meter/Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Disconnect the mass air flow (MAF) sensor electrical connector (1).
3. Remove the air inlet duct.
4. Remove the MAF sensor (2) from the air filter housing.
INSTALLATION PROCEDURE
1. Install the MAF sensor (2) to the air filter housing.
2. Install the air inlet duct.
3. Connect the MAF sensor electrical connector (1).
