buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Disconnect/Connect Procedure|Page 9944 > < Disconnect/Connect Procedure|Page 9942
Page 2
background image

5. Remove the battery positive cable nut (1) and cable (3) from the underhood electrical center.

6. Remove the battery ground negative cable nut and cable from the transaxle stud.
7. Remove the starter motor BAT terminal nut from the starter motor.
8. Remove the battery positive cable from the starter motor BAT terminal.

9. Remove the battery cable conduit retainers from the inner fender (1) and the lower tie bar (2).

Disconnect/Connect Procedure|Page 9944 > < Disconnect/Connect Procedure|Page 9942