Terraza FWD V6-3.5L VIN 8 (2005)
Control Arm Bushing: Service and Repair
Rear Suspension
Independent Rear Axle
Rear Axle Lower Control Arm Bushing Replacement
^
Tools Required
-
J 21474-01 Control Arm Bushing Set
-
J 45411 Control Arm Bushing Receiver
Removal Procedure
1. Remove the lower control arm.
Important: Identify the orientation of the voids in the bushing to the crossmember.
2. Remove the bushing from the crossmember.
3. In order to remove the bushing from the crossmember, use the following tools from the J 21474-01:
^
J-6627-4 (1)
^
J-45411 (2)
^
J-21474-8 (3)
^
J-21474-4 (4)
Installation Procedure
Important: Install the new bushing to the crossmember in the same mannerism as the old bushing, noting the voids.
1. Use the J 21474-01 in order to install the bushing to the crossmember.