Terraza FWD V6-3.5L VIN 8 (2005)
3. Mount J 41048 in a vise and proceed as follows:
1. Position the inboard end (1) of the halfshaft assembly in tool J 41048.
2. Align the top of seal neck on the bottom die using the indicator.
3. Place the top half of the J 41048 on the lower half.
4. Before proceeding, ensure there are no pinch points on the halfshaft inboard seal. This could cause damage to the halfshaft inboard seal.
5. Insert the bolts (2).
6. Tighten the bolts by hand until snug.
