Terraza FWD V6-3.5L VIN 8 (2005)
Sliding Door Window Glass: Service and Repair
Sliding Door Swing Out Window Replacement
Window Replacement - Sliding Door Swing Out
Removal Procedure
Important: By removing the power sliding door (PSD) 15A fuse, the low current logic power for both the LH and RH power sliding door
modules (PSDM) will be interrupted and both PSDs will be inoperative.
1. If equipped with a power sliding door, disable the PSD system by removing the PSD 15A fuse from the instrument panel (I/P) fuse block.
2. Remove the sliding door garnish molding. Refer toGarnish Molding Replacement - Sliding Door (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair/Garnish Molding Replacement - Sliding Door) in Interior Trim.
3. Use a small flat-bladed tool in order to remove the plugs from the swing-out window access hole on the sliding door.
4. Remove the swing-out window latch screws.
5. Remove the stud nuts from the swing-out window hinge.
6. Remove the swing-out window from the sliding door.
Installation Procedure
1. Install the swing-out window to the sliding door.
