buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

07-08-59-005|Page 16817 > < 07-08-59-005
Page 2
background image

Attach the piece of foam to the witness mark on the liftgate as shown above. 

Tighten the rear wiper assembly bolts.

Tighten

Tighten the rear wiper assembly bolts to 6 N.m (53 lb in).

Install the rear liftgate trim panel. Refer to Liftgate Trim Panel Replacement in SI.

Verify that the noise is gone.

Parts Information

Order Adhesive Back Shim Stock from Kent Automotive at 1-888-YES-KENT or online at www.kent-automotive.com.

Warranty Information

For vehicles repaired under warranty, use the table.

07-08-59-005|Page 16817 > < 07-08-59-005