Terraza FWD V6-3.5L VIN 8 (2005)
3.
Remove the wiper motor crank arm nut (4) and crank arm (5).
4.
Remove the wiper motor screws (3).
5.
Remove the wiper motor from the module assembly.
Installation Procedure
Important:
A new wiper motor will be shipped in the parked position.
1.
Position the crank arm (5) to the wiper motor pivot shaft. Ensure the arm resides between the 2 casting dimples (2) as shown.
2.
Install the crank arm pivot nut (4).
Tighten
Tighten the pivot nut to 10 N.m (89 lb in).
3.
Using the J 39529 secure the transmission link (1) to the wiper crank arm (5).
4.
Position the module assembly to the lower plenum. Refer to Wiper Motor Module Replacement.
