Terraza FWD V6-3.5L VIN L (2006)
Rear Bumper Shock Absorber: Service and Repair
Energy Absorber Replacement - Rear
Removal Procedure
1. Remove the rear bumper fascia. Refer to Fascia Replacement - Rear Bumper (Pontiac) (See: Rear Bumper Cover / Fascia/Service and
Repair/Fascia Replacement - Rear Bumper (Pontiac))Fascia Replacement - Rear Bumper (Buick) (See: Rear Bumper Cover / Fascia/Service and
Repair/Fascia Replacement - Rear Bumper (Buick))Fascia Replacement - Rear Bumper (Chevrolet) (See: Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Fascia Replacement - Rear Bumper (Chevrolet)) .
2. Disconnect the rear object sensor wiring harness from the rear energy absorber, if equipped.
3. Remove the energy absorber from the fascia by releasing the tabs on the fascia.
Installation Procedure
1. Position the energy absorber to the rear bumper fascia and snap in place.