Terraza FWD V6-3.5L VIN L (2006)
1. Install the stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (See: Windows and
Glass/Windows/Service and Repair/Urethane Adhesive Installation of Stationary Windows) .
2. Use masking tape (1, 2) to hold the liftgate window into position until the urethane adhesive cures.
3. Reconnect the rear window defogger electrical connector (2).
4. Install the wiper motor. Refer to Wiper Motor Replacement - Rear.
5. Install the liftgate trim panel. Refer to Trim Panel Replacement - Liftgate (See: Trunk / Liftgate Interior Trim Panel/Service and Repair) in
Interior Trim.
6. Close the liftgate.
7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.