Terraza FWD V6-3.5L VIN L (2006)
Luggage Rack: Procedures
Luggage Carrier Rivnut Replacement
LUGGAGE CARRIER RIVNUT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the luggage carrier.
2. Drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit.
CAUTION: Refer to Safety Glasses Caution in Service Precautions.
3. Remove the rivnut from the roof.
INSTALLATION PROCEDURE
1. Use a 10 mm (0.39 in) drill bit to drill the hole in the roof out.
2. Install a replacement rivnut to the hole in Sunroof/Moonroof using a rivnut tool, or equivalent.
3. Install the luggage carrier.
