Terraza FWD V6-3.5L VIN L (2006)
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the master cylinder mounting nuts.
^
Tighten the nuts to 29 Nm (21 ft. lbs.).
4. Remove the plugs from the brake pipes
5. Connect the brake pipes to the master cylinder.
^
Tighten the fittings to 32 Nm (24 ft. lbs.).
6. Connect the electrical connector to the brake fluid level sensor.
7. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) Hydraulic Brake System Bleeding (Pressure).