Terraza FWD V6-3.5L VIN L (2006)
Radiator Hose: Service and Repair
Radiator Outlet Hose Replacement
Radiator Hose Replacement - Outlet
^
Tools Required
-
J 38185 (SA9111E) Hose Clamp Pliers
Removal Procedure
Important: Use the J 38185 (SA9111E) to gently release tension on the hose clamp until the hose clamp lock feature engages allowing removal of
the hose.
1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
2. Using the J 38185 (SA9111E), release tension on the hose clamp at the water pump until the clamp locks.
3. Remove the radiator outlet hose from the water pump.
4. Raise and support the vehicle on a suitable hoist. Refer to Lifting and Jacking the Vehicle.
5. Using the J 38185 (SA9111E), release tension on the hose clamp at the radiator until the clamp locks.
6. Remove the radiator outlet hose from the radiator.
Installation Procedure
Important: Release the hose clamp retention lock by using a small flat bladed screwdriver.