Terraza FWD V6-3.5L VIN L (2006)
Blower Motor Resistor: Service and Repair
Blower Motor Resistor Replacement - Auxiliary
BLOWER MOTOR RESISTOR REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the accessory panel from the left rear quarter trim.
2. Disconnect the auxiliary blower motor resistor electrical connector.
3. Remove the auxiliary blower motor resistor screws.
4. Remove the auxiliary blower motor resistor from the auxiliary HVAC module assembly.
INSTALLATION PROCEDURE
1. Install the auxiliary blower motor resistor to the auxiliary HVAC module assembly.
2. Install the auxiliary blower motor resistor screws.
NOTE: Refer to Fastener Notice.
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the auxiliary blower motor resistor electrical connector.
4. Install the accessory panel from the left rear quarter trim panel.