Terraza FWD V6-3.5L VIN L (2006)
High Pressure Safety Valve HVAC: Service and Repair
Compressor Pressure Relief Valve Removal (With RPO Code C60)
COMPRESSOR PRESSURE RELIEF VALVE REMOVAL (WITH RPO CODE C60)
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant from the air conditioning (A/C) system. Refer to Refrigerant Recovery and Recharging.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the high pressure relief valve (1).
IMPORTANT: Immediately cap or tape the open A/C compressor opening immediately in order to prevent system contamination.
4. Remove and discard the O-ring seal (2).
5. Cap or tape the pressure relief valve port.
INSTALLATION PROCEDURE
