Terraza FWD V6-3.5L VIN L (2006)
7. Install the auxiliary heater inlet/outlet pipe clip nut (1).
Tighten the nut to 10 N.m (89 lb in).
8. Lower the vehicle.
9. Install the auxiliary heater inlet/outlet pipe clip nut (1).
Tighten the nut to 10 N.m (89 lb in).
10. Install the heater inlet and outlet hoses to the auxiliary heater inlet/outlet pipes.
11. Using a small flat-bladed screwdriver, release the hose clamp retention locks.
12. Fill the coolant system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (Vac-N-Fill).
