Terraza FWD V6-3.5L VIN L (2006)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor (VSS) Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the right front tire and wheel.
3. Remove the right engine splash shield.
4. Disconnect the vehicle speed sensor wiring harness connector.
5. Remove the vehicle speed sensor bolt (9).
6. Remove the vehicle speed sensor (10) from the extension case.
7. Remove the O-ring seal (11) from the vehicle speed sensor (10).
8. Important:
Handle the vehicle speed sensor (10) carefully.
Inspect the vehicle speed sensor and O-ring seal for the following:
^
Damaged connector
^
Cracked housing
^
Signs of rotor damage
^
Cuts or nicks on the O-ring seal (11)