buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

06-08-49-009|Page 511 > < Air Bag System Schematic Icons|Page 504
Page 1
background image

Fuel Distance/Mileage Module: Customer Interest
Instruments - Temp. Display/Fuel Economy Readings Wrong

Bulletin No.: 06-08-49-009

Date: March 09, 2006

TECHNICAL

Subject:
Outside Air Temperature Display Incorrect or Instantaneous Fuel Economy Readings Not Accurate (Replace and/or Reprogram Instrument Panel
Cluster)

Models:
2005-2006 Buick Terraza
2005-2006 Chevrolet Uplander
2005-2006 Pontiac Montana
2005-2006 Saturn Relay

with Inflatable Restraint Systems (RPOs AJ7, AK5 or AW9)

Condition

Some customers may comment on an outside air temperature display that is incorrect or an instantaneous fuel economy reading that is not accurate.

Correction

Important:

The new software calibration that will be installed as part of this service fix will delete the Instantaneous Fuel Economy function of the Instrument
Panel Cluster (IPC). Please inform your customer that this IPC function will be eliminated.

Technicians are to use one of the following two service procedures, which are dependent on the model year of the vehicle, to address their customer's
concern.

Record which inflatable restraint system option codes, AJ7, AK5 or AW9, the vehicle is equipped with before reprogramming the IPC. This option code
information is required during the reprogramming procedure.

Important:

Do not try to reprogram a 2005 model year IPC with 2006 model year calibrations. The IPC will become inoperative. The updated calibrations are
only for a 2006 model year IPC.

^

On 2005 model year vehicles, replace the IPC with a 2006 model year IPC and reprogram the new part with the updated software. The
replacement 2006 model year IPC should be obtained through your authorized electronic service center (ESC).

^

On 2006 model year vehicles, reprogram the IPC. Replacement of the IPC is not required.

Refer to the Cluster, Cluster Trim Plate Replacement-Instrument Panel procedure in SI for more information on IPC replacement procedures. Refer to
the Instrument Panel Cluster Programming and Setup procedure in SI for more information about IPC reprogramming. If the vehicle is equipped with an
electronic compass make sure it is recalibrated before returning the vehicle to the customer. Refer to the Electronic Compass Calibration procedure in SI
for more information on compass recalibration.

The updated IPC calibrations were made available to dealerships as part of TIS2000 incremental satellite update version 2.0, which was broadcast to
dealers on February 6, 2006. As always make sure your Tech 2(R) is updated with the latest software version.

Warranty Information

06-08-49-009|Page 511 > < Air Bag System Schematic Icons|Page 504