Terraza FWD V6-3.5L VIN L (2006)
41. Twist together the 2 connector wire leads of the high circuits from both stages of the I/P module to one of the deployment harness wires. Refer to
SIR Connector End Views in order to determine the correct circuits.
42. Ensure the 3-wire connection is secure.
43. Bend flat the twisted connection.
44. Secure and insulate the 3-wire connection to deployment harness using electrical tape.
45. Twist together the two connector wire leads of the low circuits from both stages of the I/P module to the deployment harness wire. Refer to SIR
Connector End Views in order to determine the correct circuits.
46. Ensure the 3-wire connection is secure.
47. Bend flat the twisted connection.