Terraza FWD V6-3.5L VIN L (2006)
Stabilizer Link: Service and Repair
Rear Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Use a wrench in order to hold the stabilizer shaft link. Remove the stabilizer shaft link nuts.
3. Remove the stabilizer shaft link.
Installation Procedure
1. Install the stabilizer shaft link.
2. Notice:
Refer to Fastener Notice.
Install the stabilizer shaft link nuts.
Tighten the stabilizer shaft link nuts to 40 Nm (30 ft. lbs.).
3. Lower the vehicle.