buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Air Compressor Shield Replacement|Page 10925 > < Air Compressor Shield Replacement|Page 10923
Page 1
background image

Compressor/Pump: Service and Repair
Air Compressor Replacement

 

Air Compressor Replacement

Removal Procedure

1. Remove the electronic level control ELC/TRAILER fuse.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the A/C hoses for access if equipped. 

4. Squeeze the clips on the side of the air compressor filter (1) in order to remove the filter from the underbody rail.
5. Remove the compressor bracket bolt.
6. Remove the compressor bracket nuts. Allow the compressor to hang from the bracket hook.
7. Remove the air line from the air dryer.
8. Disconnect the air compressor electrical connector.
9. Rotate the air compressor and the bracket 90 degrees in order to disengage the compressor bracket hook from the vehicle.

10. Remove the air compressor with the air compressor bracket.
11. Remove the air compressor dryer. 
12. Remove the air compressor relay from the air compressor bracket.

13. Remove the air compressor bolts.
14. Remove the air compressor from the air compressor bracket.

Air Compressor Shield Replacement|Page 10925 > < Air Compressor Shield Replacement|Page 10923