Terraza FWD V6-3.5L VIN L (2006)
Install the inflator solenoid nut.
Tighten the inflator solenoid nut to 3 Nm (27 inch lbs.).
4. Install the inflator solenoid fill valve nut.
Tighten the inflator solenoid fill valve nut to 3 Nm (27 inch lbs.).
5. Install the inflator solenoid fill valve cap.
6. Install the air lines to the inflator solenoid.
7. Connect the inflator solenoid electrical connector.
8. Install the left rear quarter trim panel.
9. Install the ELC/TRAILER fuse.
