cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Body and Frame|Locks > < Customer Interest for Glove Compartment:|924610
Page 1
background image

Glove Compartment: All Technical Service Bulletins
Interior Trim - Glove Box Door Binds/Difficult to Open

Bulletin No.: T-92-46
File in Group:

10

Number:

238 

Corp. Ref. No.: 211602
Date:

Jan. 1992

SUBJECT:

GLOVE BOX DOOR BINDS OR IS DIFFICULT TO OPEN

MODELS AFFECTED:

1987-1992 ALLANTES

Some 1987-1992 Allantes may experience a condition where the glove box door binds or is difficult to open. This may be caused by the glove box
release handle contacting the glove box cover and not allowing the release handle to travel far enough to release the lock rods.

To repair this condition use the following procedure:

1.

Remove the glove box door trim pad using the appropriate Allante Service Information Manual.

Figure 1

2.

Using a soft top quarter glass shim, P/N 1638640, cut two shims to the size of the lower jaw (refer to Figure 1) and bond the shim to the right and
left side with Loctite 401 or equivalent.

3.

Reinstall glove box door trim pad. Verify glove box door release operation. If condition is not corrected, repeat the above procedure and add an
additional shim.

Parts are currently available through GMSPO.

For warranty purposes use Labor Operation T6583 at .3 hour.

Body and Frame|Locks > < Customer Interest for Glove Compartment:|924610