Allante V8-273 4.5L (1991)
Paint: All Technical Service Bulletins
Paint - Codes, Ordering, General Information
NO.: 90-I-69
DATE:
Aug. 1990
GROUP:
0 CORP. NO.:
SUBJECT:
1991 MODEL PAINT INFORMATION
NOTE:
This Bulletin has been updated by Bulletin # 90I69A Group O
The listings of 1991 paint codes contained in this bulletin will enable dealers to order the necessary paint materials required for effective field repairs.
The list of colors indicates the suppliers' ordering codes for exterior, interior, vinyl roof moldings, and paint stripe colors.
Listed below are Cadillac Assembly Plants and their suppliers. It should be noted, however, that paint suppliers are subject to change.
Other manufacturers produce service paint which could perform satisfactorily for field repairs. Paint suppliers in your area can provide you with
information regarding these materials.
The paint listed in this bulletin is (or soon will be) available from local paint suppliers.
The Service Parts Identification (SPID) label illustrated in Figure 1 is located on the inside of the trunk panel or the spare tire cover. This label contains
the paint codes needed to identify the paint materials for field repairs. Note this label identifies the paint code along with the WA# for that paint code. It
is equally important to use this WA# along with the paint code to identify the correct repair materials. Care should be taken to transfer the SPID label or
its information if the panel to which the label is affixed requires replacement. Replacement SPID labels are not available.
EXTERIOR PLASTIC PARTS
All 1991 Cadillacs have exterior parts made of various types of plastic materials that require specific procedures to obtain high quality refinishing
results. Included in this bulletin is a chart listing the different types of plastic materials used on 1991 models. For best results when painting is required,
determine the type of plastic material from the chart. Then follow the correct paint procedure, depending upon what painting material and equipment is
available.
A.
General Paint Procedure For Exterior Flexible Plastics
Polyvinylchloride (PVC); Polyurethane (PUR, TPUR, RRIM, RIM); Thermoplastic Elastomer (TPE); Thermoset Polyester (SMC); EPDM
Rubber (supplied in prime).
There are a multitude of finishing systems available on the market for painting and/or repairing flexible plastic parts. Following is a general
outline of painting procedures, including a list of available products. Refer to the manufacturer's literature available through your jobber for
details on proper mixing and application.
