Allante V8-273 4.5L (1991)
Hydraulic Assembly: Service and Repair
Hydraulic Unit Mounting Adapter
HYDRAULIC UNIT MOUNTING ADAPTER
Hydraulic Unit And Plunger Mounting
REMOVE OR DISCONNECT
1. Remove hydraulic unit as described in this section.
2. From inside of car, remove the four adapter mounting nuts.
3. Remove adapter from car.
INSTALL OR CONNECT
1. Position adapter in car.
2. Install mounting nuts. Tighten to 20 Nm (15 lbs. ft.).
3. Install hydraulic unit as described in this section.