Allante V8-273 4.5L (1991)
Fluid Pressure Sensor/Switch: Service and Repair
Install Transaxle Case Side Cover
Case Side Cover, Oil Pump And Control Valve.
Case Side Cover Bolts Inspection.
INSTALL OR CONNECT
1. Raise vehicle.
2. Clean case and side cover gasket surfaces. Install new gaskets on case, retain with petroleum jelly.
3. Side cover, bolts and nuts. Inspect bolts, as per figure, for damage. Replace bolts as needed.
4. Torque bolts and nuts to 14 Nm (10 lbs ft).
