Allante V8-273 4.5L (1991)
Figure 4
11.
Stretch the universal deployment harness and pigtail adapter from the inflator module to its full length. Refer to Figure 4.
12.
Place a power source near the shorted end of the deployment harness. (Recommended application: 12 volts minimum, 2 amps minimum. A car
battery is suggested.)
Figure 5
13.
Connect the SIR inflator module to the pigtail adapter on the universal deployment harness. Refer to Figure 5.
NOTICE:
Ensure that the pigtail adapter connector is fully seated into the inflator module connector. Failure to fully seat the connectors may
leave the shorting bar located in the inflator module connector active and may result in nondeployment of the inflator module.
14.
Verify that the area around the inflator module is clear of all people and loose or flammable objects.
15.
Verify that the inflator module is resting with its soft vinyl trim cover facing up.
16.
Notify all people in the immediate area of your intention to deploy the inflator module as the deployment will be accompanied by a substantial
report which may startle the uninformed.
