Allante V8-273 4.5L (1991)
Bolt Locations - Oil Pump Assembly.
REMOVE OR DISCONNECT
1. Side cover (51) and gaskets (64 & 65, figure 1).
2. Wiring harness (48, figure 1) and solenoid (328, figure 3) from pressure switches and the case connector.
3. Throttle Valve (T.V.) lever (50, figure 1) and bracket assembly and link (49, figure 1) from control valve assembly (73, figure 1) and conduit clip.
4. Bolts (40, 42 & 379 - figure 2) from pipe & cover assembly (374). Remove pipe and cover assembly.
5. Pump assembly screws (45, 46, 47 and 54, figure 3). DO NOT loosen the 3 Torx screws (225, figure 3).