Catera V6-3.0L VIN R (1997)
3.
Plug the antenna cable into the radio.
4.
Connect the new cable into the antenna amplifier.
5.
Secure the new cable to the rear seat-to-back window panel and floor pan with duct tape to prevent vibration.
6.
Install the radio and Electronic Climate Control (ECC) head (6 screws).
7.
Install the radio bezel (Refer to Figure 18):
^
Install the electrical connectors to the radio bezel.
^
Install the radio bezel (4 screws).
^
Install the ashtray.
^
Install the switch screw covers and the trunk, fuel door and heated seat (if equipped) switches.
^
Install the Traction Control and Hazard switch covers.
8.
Reposition the RH side front carpet (1). Refer to Figure 19.
9.
Install the RH side front kick panel (2 screws).
