Catera V6-3.0L VIN R (1997)
Trim Panel: Service and Repair
Assist Handle
REMOVAL PROCEDURE
Assist Handle Replacement: Removal Procedure
1. Lift the covers that conceal the screws (one at each end) in order to remove the front assist handle.
2. Remove the screws from the front assist handle.
3. Remove the front assist handle.
INSTALLATION PROCEDURE
Assist Handle Replacement: Installation Procedure
1. Install the front assist handle.
2. Install the screws to the front assist handle.
Tighten
Tighten the front assist handle screw to 1.5 Nm (13 lb in).
3. Close the front assist handle covers that conceal the screws (one at each end).