Catera V6-3.0L VIN R (1997)
Air Bag: Service and Repair
Passenger Seat Module
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to Disabling the SIR System under Air Bags Arming and Disarming.
2. Move the seat to the full forward position.
3. Remove the seatback panel. Refer to Front Seatback Panel in seats.
4. Remove the inflatable restraint front seat module electrical connector.
5. Remove the nuts from inflatable restraint front seat module.
6. Remove the inflatable restraint front seat module from seatback.
INSTALLATION PROCEDURE
1. Install the inflatable restraint front seat module to seatback.
NOTICE: Refer to Fastener Notice in Service Precations.
2. Install the nuts to inflatable restraint front seat module.
TIGHTEN
Tighten the inflatable restraint front seat module nuts to 5 N.m (44 lb. in).
3. Install the inflatable restraint front seat module electrical connector.
4. Install the seatback panel. Refer to Front Seatback Panel in seats.
5. Install the seat to original position.
6. Enable the SIR system. Refer to Enabling the SIR System under Air Bags Arming and Disarming.