Catera V6-3.0L VIN R (1997)
Splicing Twisted/Shielded Cable
2. Unwrap the tape. Do not remove the tape. The tape will be used in order to rewrap the twisted conductors after you have made the splice.
Splicing Twisted/Shielded Cable
3. Prepare the splice. Untwist the connectors and follow the splicing instructions for copper wire.
4. Re-assemble the cable.
^
Rewrap the conductors with the mylar tape.
^
Use caution not to wrap the drain wire in the tape.
^
Follow the splicing instructions for copper wire and splice the drain wire.
^
Wrap the drain wire around the conductors and tape with mylar tape.
Splicing Twisted/Shielded Cable
5. Tape over the entire cable. Use a winding motion when you apply the tape
Wire Size Conversion Table
