Cimarron V6-173 2.8L (1986)
assembly at this time.
2.
Raise vehicle.
FIGURE 3 - LATE DESIGN SYSTEM (CURRENT PRODUCTION)
3.
Install hose end of return hose assembly on cooler inlet pipe using clamps previously removed from vehicle (View A, Figure 3).
4.
Lower vehicle.
5.
Position gear assembly away from cowl while connecting the return hose assembly fitting to gear. Tighten to 27 N-m (20 ft.lbs.).
6.
Tighten steering gear mounting bracket nuts to 38 N-m (28 ft.lbs.).
FIGURE 4 - COUPLING AND BOLT
7.
Install pinch bolt on flexible coupling at base of steering column as shown in Figure 4. Tighten to 50 N-m (37 ft.lbs.).
