Cimarron V6-173 2.8L (1986)
19.
Torque fuel feed pipe fitting at fuel rail to 20-35 N-m and retaining clip stud to 37-41 N-m.
20.
Reconnect fuel feed hose to chassis fuel feed pipe ensuring position identified in step 9 is maintained and torque to 20-34 N-m utilizing backup
wrench on fining.
21.
Assemble plenum to intake manifold utilizing new gaskets at both the plenum to intake manifold and EGR valve to EGR transfer tube interface.
22.
Torque plenum and EGR transfer tube fasteners to 23-29 N-m.
23.
Assemble crossover pipe heat shield to engine.
24.
Install air cleaner and duct.
25.
Reconnect electrical connectors, battery, and install fuel tank filler cap.
26.
Start engine, check all connections for possible fuel or coolant leaks, and correct as required.
Parts required for this installation are noted below and are available from GMSPO:
Quantity
Description
PN
Required
Fuel Feed Pipe/Expansion Chamber
10100095
1
Plenum Gasket Kit
14089058
1
EGR Transfer Tube Gasket
14088263
1
For warranty purposes use Labor Operation T6348 at 1.8 hours.
