Cimarron V6-173 2.8L (1986)
FIGURE 2 - EARLY DESIGN SYSTEM
13.
On all 1985 vehicles and 1986 vehicles built prior to broadcast #500063, remove hose, labeled #5 from cooler inlet to intermediate pipe
shown in Figure 2.
14.
Lower vehicle.
15.
Remove return hose assembly.
16.
On all 1985 vehicles and 1986 vehicles built prior to broadcast #500063, remove return hose first, then remove intermediate pipe labeled #3
in Figure 2.
INSTALLATION PROCEDURE
1.
Position the new hose assembly in vehicle, inserting the flexible hose end behind the rack and pinion gear. Do not secure return hose
