Cimarron V6-173 2.8L (1986)
9. Tighten both mounting clamps. Torque nuts to 38 Nm (128 ft. lbs.).
10. Connect pressure pipe to gear and torque fitting to 27 Nm (120 ft. lbs.).
11. Connect tie rods to Struts. Torque to specification.
12. Install front wheel and tire assemblies.
13. Lower car.
14. Install air cleaner and washer jar.
15. Install l.P. sound insulator.
16. Add power steering fluid and bleed system.
17. Check toe setting. Adjust as required.
