Cimarron V6-173 2.8L (1986)
Throttle Valve Cable/Linkage: Adjustments
Models W/Lock Tab Adjusting Cable
(Figure 1) T.V. Cable Adjuster
PROCEDURE
1. Stop engine.
2. Depress and hold down metal re-adjust tab at engine end of T.V. cable (figure 1).
3. Move slider until it stops against fitting, then release re-adjust tab.
4. Rotate throttle lever to its "full travel position".
5. The slider must move (ratchet) toward the lever when the lever is rotated to its "full travel position".