Cimarron V6-173 2.8L (1986)
FIGURE 4 - TURBINE SHAFT
FIGURE 5 - TURBINE SHAFT SEAL REPLACEMENT
CONDITION
CAUSE AND CORRECTION
TCC APPLY
TCC CROWD
SHUDDER
SHUDDER
X
10.
Inspect the turbine shaft Teflon seals and "O" ring seal
for damage, cuts, or distortion (see Figure 4). If the Teflon seals require replacement, make sure they are installed and sized as shown in Figure 5 (refer
to Serviceman Bulletin 83-102, Group 7, Number 74, Item A).
FIGURE 6 - TURBINE SHAFT SEAL GROOVES
X
11. Inspect the turbine shaft seal grooves. A step in the
bottom corners of the seal groove will keep the seal from contacting the side wall of the groove