Cimarron V6-173 2.8L (1986)
and will prevent proper sealing (Figure 6). If this condition is found, replace the turbine shaft
and seals (refer to Serviceman Bulletin 83-102, Group 7, Number 74, Item B).
FIGURE 7 - CASE COVER -- VALVE BODY SIDE
X
12. Check the case cover sleeve converter feed oil hole that
it is aligned with the oil channel in the case cover (Figure 7).
X
13.
Check the converter end play, using tool J-29830A. The
end play specification is .5 mm (.020"). Converters with end play more than .5 mm (.020") must
be replaced.
X
14.
The turbine shaft sleeve may have excessive internal
leakage. If all of the above items are OK, replace the turbine shaft.
