CTS-V V8-6.0L VIN U (2006)
Air Bag(s) Arming and Disarming: Service and Repair
SIR Disabling and Enabling Zone 8
SIR DISABLING AND ENABLING ZONE 8
DISABLING PROCEDURE
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Remove the rear seat.
5. Locate the right rear fuse center (1) under the rear seat. Remove the fuse center top cover.
6. Locate and remove the SIR fuse from the right rear fuse center.
IMPORTANT: With the SIR fuse removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is normal
operation, and does not indicate an SIR system malfunction.
7. Remove the right rear sail panel.
8. Remove the connector position assurance (CPA) (1) from the right/passenger roof rail module yellow connector (2).
9. Disconnect the right roof rail module yellow connector (3) from the vehicle harness yellow connector (2).
10. Remove the passenger/right sound insulator from the instrument Panel (I/P) (3).
11. Remove the CPA from the I/P module yellow connector (1).
12. Disconnect the I/P module yellow connector (1) from the vehicle harness yellow connector (2).
13. Remove both CPA locks from the passenger/RF side impact module and seat belt pretensioner yellow connector (1) located under the front of
