CTS-V V8-6.0L VIN U (2006)
Power Seat Motor Position Sensor: Service and Repair
Power Recliner Sensor Replacement - Front
POWER RECLINER SENSOR REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front seat.
CAUTION: Refer to SIR Caution.
2. Disconnect the electrical connector from the sensor (2).
3. Rotate the sensor counterclockwise and remove it (1).
INSTALLATION PROCEDURE
1. Install the sensor (1) in the motor and rotate it clockwise until it locks in to place.
2. Connect the electrical connector (2) to the sensor.
