CTS-V V8-6.0L VIN U (2006)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the (2) park brake cable bracket mounting bolts.
Tighten the park brake cable bracket mounting bolts to 60 Nm (44 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the rear park brake cable (2) to the rear park brake cable bracket (1).
4. Ensure that the locking tabs are properly seated.
5. Connect the rear park brake cable (2) to the park brake actuator lever (3).
6. Pull down on the intermediate park brake cable (2) near the park brake cable connector (1).
7. Connect the intermediate park brake cable (2) to the park brake connector (1).
8. Install the rear tire and wheel assembly.
9. Lower the vehicle.
10. To ensure that the park brake cable retainers are seated, cycle the park brake pedal 1 to 2 times.
