CTS-V V8-6.0L VIN U (2006)
Parking Brake Shoe: Testing and Inspection
Park Brake Shoe Inspection
1. Raise and support the vehicle.
2. Remove the rear tire and wheel assembly.
3. Remove the rear brake caliper. in Disc Brakes.
4. Remove the rear brake caliper bracket.
5. Remove the rear brake rotor.
6. Inspect and replace the park brake shoe and lining if any of the following conditions are found:
^
Excessive wear indicated by the park brake lining being worn down to the shoe
^
Brake lining cracking
^
Oil or fluid contamination of the brake lining
7. Adjust the park brake shoe.
8. Install the rear brake rotor.
9. Install the rear brake caliper bracket.
10. Install the rear brake caliper. in Disc Brakes.
11. Install the rear tire and wheel assembly.
12. Lower the vehicle.
