CTS-V V8-6.0L VIN U (2006)
1. If necessary, install the exhaust manifold heat shield and bolts.
Tighten the exhaust manifold heat shield bolts to 9 N.m (80 lb in).
Notice: Refer to Fastener Notice.
2. Position the exhaust manifold and a NEW gasket into place.
3. Lower the vehicle.
4. Install the exhaust manifold bolts. Refer to Exhaust Manifold Installation - Right Side.
5. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
6. Install the starter motor. Refer to Starter Motor Replacement.
7. Install the right catalytic converter. Refer to Catalytic Converter Replacement - Right Side.
8. Lower the vehicle.
9. Install the right bank spark plugs. Refer to Spark Plug Replacement.
10. Install the right bank coil assembly. Refer to Ignition Coil Replacement.
11. Install the oil level dipstick tube. Refer to Oil Level Indicator and Tube Replacement.
12. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement.
