CTS-V V8-6.0L VIN U (2006)
Camshaft Position Sensor: Service and Repair
CAMSHAFT POSITION SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the accessory drive belt.
2. Remove the air conditioning drive belt.
3. Remove the accessory drive belt idler pulley.
4. Remove the crankshaft balancer assembly.
5. Remove the camshaft position sensor mounting bolts (1).
6. Remove the camshaft position sensor assembly (4, 5, 6) from the front cover (7).
7. Disconnect the camshaft position sensor jumper harness (2) and the engine harness (3) electrical connectors.
8. Remove the camshaft sensor assembly (4, 5, 6).
9. Disconnect camshaft position sensor (5) from the jumper harness (4).
INSTALLATION PROCEDURE
