CTS-V V8-6.0L VIN U (2006)
3. Pull the right side transmission support down only enough to allow installation of the chassis fuel hose/pipes.
4. Install the bolts securing the transmission support to the underbody.
5. Install the bolt securing the fuel filter bracket to the body.
Tighten the fuel filter bracket bolt to 9 N.m (80 lb in).
6. Push upward in order to connect the fuel/brake bundle chassis pipe retainer to the underbody.
7. Complete the following in order to install the chassis hose/pipes to the retainers (2) located at the rearward portion of the rail:
1. Install the chassis hose/pipes into the retainers (2).
2. Close the retainers (2) at the top.
3. Insert the retainers (2) into the rail.
8. Install the chassis hose/pipes into the retainers (1) located at the forward portion of the rail.
9. Close the retainers.
10. Push the locking mechanism (1) inward in order to engage the fuel/brake bundle chassis pipe retainers to the rail.