CTS-V V8-6.0L VIN U (2006)
Fuel Filler Hose: Service and Repair
FILLER TUBE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel filler cap.
2. Drain the fuel tank below the level of the fuel filler hose. Refer to Fuel Tank Draining.
3. Remove the bolts securing the fuel filler tube to the body.
4. Remove the right rear wheel.
5. Remove the right rear wheelhouse liner.
6. Remove the fuel filler tube brace bolt.
7. Disconnect the fuel filler hose (1) from the fuel tank.
8. Disconnect the filler vent tube (2) from the evaporative emission (EVAP) hose.
9. Remove the fuel filler tube from the vehicle.
INSTALLATION PROCEDURE
1. Position the fuel filler tube to the vehicle.
2. Connect the filler hose (1) to the fuel tank.
NOTE: Refer to Component Fastener Tightening Notice.
Tighten the fuel filler tube hose clamp (3) to 3.5 N.m (31 lb in).